Pressure Reducing Valve
|
GD-400SS
* For extremely low pressure control * Max. reduction ratio is 400 : 1 * Wetted parts: Stainless steel |
|
| Feature | Low pressure control / Wetted parts: Stainless steel / Flanged | |
| Type | Direct-acting type | |
| Specifications | Application | Air , Nitrogen gas |
| Inlet pressure | 2.5 - 400kPa | |
| Reduced pressure | 0.5 - 20kPa(*) | |
| Connection | JIS 10K FF flanged | |
| Min. differential pressure | 0.002MPa | |
| Max. pressure reduction ratio | 400:1 | |
| Max. temperature | 60 degree(C) | |
| Material | Body | Stainless steel |
| Valve | Synthetic rubber | |
| Diaphragm | Synthetic rubber | |
| Trim | Stainless steel | |
| * Reduced pressure (A): 0.5-1.4 kPa (B): 1.2-3.3 kPa (C): 3.0-8.0 kPa (D): 7.0-20 kPa |
Enter a value in the following field for a calculation of flow rate.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order.
| Size | L (mm) | H (mm) | Weight (kg) | Cv value |
| 15A(1/2) | 166 | 526 | 32 | 1.5 |
| 20A(3/4) | 170 | 526 | 32 | 2 |
| 25A(1) | 170 | 526 | 33 | 3 |
 |
| Drawing (1,249 KB) |
| CAD external view 15A-50A (410 KB) |
| Instruction manual (1,949 KB) |
