Pressure Reducing Valve
|
GD-200C
* Direct-acting type * Stable reduced pressure against fluctuation of inlet pressure because of pressure balance mechanism * Nylon 11 coating both inside and outside |
|
| Feature | Direct-acting type / Nylon 11 coating | |
| Type | Direct-acting type | |
| Specifications | Application | Cold and hot water , Oil (kerosene , heavy oil A and B) , Air , Other non-dangerous fluids |
| Inlet pressure | Max. 1.0MPa | |
| Reduced pressure | 0.05 - 0.7MPa(*) | |
| Connection | JIS 10K FF flanged | |
| Min. differential pressure | 0.05MPa | |
| Max. pressure reduction ratio | 10:1 | |
| Max. temperature | 60 degree(C) | |
| Material | Body | Ductile cast iron |
| Valve & seat | NBR & Stainless steel | |
| Diaphragm | NBR | |
| * Reduced pressure (A): 0.05-0.25 MPa (B): 0.26-0.7 MPa * Trim (Valve seat,Spindle) material [SUS316] is also available (GD-200HS) |
Enter a value in the following field for a calculation of flow rate.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order.
| Size | L (mm) | H (mm) | Weight (kg) | Cv value |
| 15A(1/2) | 145 | 296 | 8.3 | 2.5 |
| 20A(3/4) | 150 | 296 | 8.3 | 4 |
| 25A(1) | 150 | 318 | 10.1 | 5 |
| 32A(1 1/4) | 195 | 398 | 17.4 | 8 |
| 40A(1 1/2) | 195 | 398 | 17.4 | 12 |
| 50A(2) | 195 | 412 | 19.3 | 16 |
| 65A(2 1/2) | 270 | 573 | 40.1 | 28 |
| 80A(3) | 270 | 598 | 43.8 | 36 |
| 100A(4) | 308 | 666 | 70.8 | 68 |
| 125A(5) | 380 | 875 | 144.1 | 75 |
| 150A(6) | 400 | 930 | 173.1 | 108 |
[About flow rate]
| Selection data： | Nominal Size Selection Chart (For Air) Nominal Size Selection Chart (For Water) |
 |
| Drawing (15A-50A) (234 KB) |
| Drawing (65A-100A) (258 KB) |
| Drawing (125A-150A) (270 KB) |
| Instruction Manual (622 KB) |
| CAD external view (150 KB) |
