Pressure Reducing Valve
|
GD-26GS
* For gas application * Direct-acting type * Anti-corrosion material for wetted parts * Low noise and stable pressure control * Integral strainer prevents dirt problem * Closed construction makes no leakage outside |
|
| Feature | Direct-acting type / Stainless steel wetted parts | |
| Type | Direct-acting type | |
| Specifications | Application | Air , Other non-dangerous fluids |
| Inlet pressure | Max. 1.0MPa | |
| Reduced pressure | 0.05 - 0.7MPa(*) | |
| Connection | JIS Rc screwed | |
| Min. differential pressure | 0.05MPa | |
| Max. pressure reduction ratio | 10:1 | |
| Max. temperature | 90 degree(C) | |
| Material | Body | Stainless steel |
| Valve | Synthetic rubber | |
| Seat | Stainless steel | |
| Diaphragm | Synthetic rubber | |
| * Reduced pressure (A): 0.05-0.35 MPa (B): 0.3-0.7 MPa |
Enter a value in the following field for a calculation of flow rate.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order.
| Size | L (mm) | H (mm) | Weight (kg) | Cv value |
| 20A(3/4) | 135 | 170 | 2.2 | 2.3 |
| 25A(1) | 135 | 170 | 2.2 | 3.5 |
| 32A(1 1/4) | 180 | 224 | 4.5 | 6 |
| 40A(1 1/2) | 180 | 224 | 4.7 | 7 |
| 50A(2) | 220 | 239.5 | 6.5 | 11 |
[About flow rate]
| Selection data： | Rated Flow Flowrate Chart Nominal Size Selection Chart |
 |
| Drawing (190 KB) |
| CAD external view (83 KB) |
| Instruction Manual (624 KB) |
