Pressure Reducing Valve/Drain Separator
GD-26GS
* Stainless steel for wetted parts
* Low noise and stable pressure control
* Integral strainer prevents dirt problem
* Closed construction makes no leakage outside
Specifications
| Features | For air, stainless steel | |
|---|---|---|
| Type | Direct-acting type | |
| Specifications | Product type | Direct-acting type |
| Nominal size | 20A (3/4") - 50A (2") | |
| Application | Air, and other non-dangerous fluids | |
| End connection | JIS 10K FF flanged | |
| Inlet pressure | Max. 1.0 MPa | |
| Reduced pressure | 0.05 - 0.7 MPa (*) | |
| Max. temperature | 90 degree(C) | |
| Min. differential pressure | 0.05 MPa | |
| Max. pressure reduction ratio | 10 : 1 | |
| Working temperature | 5 - 90 degree(C) | |
| Material | Body | Stainless steel |
| Valve | EPDM | |
| Valve seat | Stainless steel | |
| Diaphragm | EPDM | |
Remarks
* Reduced pressure
(A): 0.05-0.35 MPa
(B): 0.3-0.7 MPa
* Built-in strainer(40mesh)
Enter a value in the following field for a calculation of flow rate.
* Whenever you change values, be sure to click on the "Calculate" button.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order.
Dimensions and Weights
| Size | L (mm) | H (mm) | Weight (kg) | Cv value |
|---|---|---|---|---|
| 20A(3/4) | 135 | 170 | 2.2 | 2.3 |
| 25A(1) | 135 | 170 | 2.2 | 3.5 |
| 32A(1 1/4) | 180 | 224 | 4.5 | 6 |
| 40A(1 1/2) | 180 | 224 | 4.7 | 7 |
| 50A(2) | 220 | 239.5 | 6.5 | 11 |
About flow rate
Selection data：
Nominal Size Selection Chart
Dimensional drawing
