Solenoid Valve/Motor Valve

DP-200F

* The shock of water hammer is reduced, and the closing time of valve is shortened.
* No leakage at valve seat because synthetic rubber is used for valve part.
* Usable for wide pressure range of 0 - 1.0 MPa (0.1 - 1.0 MPa if the coil set sideways).





DP-200F

Specifications

Features AC, normally closed, flanged
Type Diaphragm type solenoid valve
Specifications Product type Solenoid Valve_Diaphragm
Nominal size 15A (1/2") - 50A (2")
Application Cold and hot water,Air,N2 gas,CO2 gas (dry),Ar gas
End connection JIS 10K FF flanged
Max. pressure 1 MPa
Working pressure 0 - 1 MPa (not usable under vacuum)
Min. differential pressure 0 MPa (0.1 MPa or more is required when installed with the coil sideways)
Working temperature 5 - 60 degree(C) (no freeze condition)
Ambient temperature Max. 50 degree(C) (no freeze condition)
Rated voltage AC 110/220V selective type - 50/60Hz common
Valve seat leakage None (by confirming pressure gauge visually)
Installation posture Horizontal or vertical (the coil has to be within 90 degrees from upward position)
Protection class IP64
Material Body Bronze
Valve NBR (Diaphragm)

Remarks

* Available with rubber FKM for the diaphragm. Max temperature 90℃.


Dimensions and Weights
Size L (mm) H (mm) Weight (kg) Cv value
15A(1/2) 120 147 2.7 4(1.7)
20A(3/4) 130 153 3.3 7.5(3.2)
25A(1) 145 169 4.8 10(4.6)
32A(1 1/4) 160 192 6.6 14(5.5)
40A(1 1/2) 170 198 7.3 17(6.5)
50A(2) 195 213 10.0 24((9.5)

*Values in the bracket indicate Cv values when the differential pressure is below 0.01MPa.

About flow rate

Dimensional drawing

Dimensional drawing