Pressure Reducing Valve/Drain Separator
GD-200C-N
* Stable reduced pressure against fluctuation of inlet pressure because of pressure balance mechanism
* Nylon 11 coating both inside and outside
* JWWA approved
Specifications
| Features | For water, nylon 11 coating | |
|---|---|---|
| Type | Direct-acting type | |
| Specifications | Product type | Direct-acting type |
| Nominal size | 15A (1/2") - 150A (6") | |
| Application | Water | |
| End connection | JIS 10K FF flanged | |
| Inlet pressure | Max. 1 MPa | |
| Reduced pressure | 0.05 - 0.7 MPa (*) | |
| Max. temperature | 60 degree(C) | |
| Min. differential pressure | 0.05 MPa | |
| Max. pressure reduction ratio | 10 : 1 | |
| Working temperature | 5 - 60 degree(C) | |
| Material | Body | Ductile cast iron |
| Valve | FKM or EPDM | |
| Valve seat | Stainless steel | |
| Diaphragm | FKM or EPDM | |
Remarks
* Reduced pressure
(A): 0.05-0.25 MPa
(B): 0.26-0.7 MPa
About flow rate
Selection data：
Nominal Size Selection Chart (For Air)
Nominal Size Selection Chart (For Water)
