Pressure Reducing Valve/Drain Separator
GD-26G
* Anti-corrosion material for wetted parts
* Low noise and stable pressure control
* Integral strainer prevents dirt problem
* Closed construction makes no leakage outside
Specifications
| Features | For air, bronze, screwed | |
|---|---|---|
| Type | Direct-acting type | |
| Specifications | Product type | Pilot-operated type |
| Nominal size | 15A (1/2") - 50A (2") | |
| Application | Air, and other non-dangerous fluids | |
| End connection | JIS Rc screwed | |
| Inlet pressure | Max. 1 MPa | |
| Reduced pressure | 0.05 - 0.7 MPa (*) | |
| Max. temperature | 90 degree(C) | |
| Min. differential pressure | 0.05 MPa | |
| Max. pressure reduction ratio | 10 : 1 | |
| Working temperature | 5 - 90 degree(C) | |
| Material | Body | Bronze |
| Valve | EPDM | |
| Valve seat | Bronze | |
| Diaphragm | EPDM | |
Remarks
* Reduced pressure
(A): 0.05-0.35 MPa
(B): 0.3-0.7 MPa
*Built-in strainer(40mesh)
Enter a value in the following field for a calculation of flow rate.
* Whenever you change values, be sure to click on the "Calculate" button.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order.
Dimensions and Weights
| Size | L (mm) | H (mm) | Weight (kg) | Cv value |
|---|---|---|---|---|
| 15A(1/2) | 115 | 159.5 | 1.6 | 2 |
| 20A(3/4) | 120 | 159.5 | 1.7 | 2.3 |
| 25A(1) | 135 | 170 | 2.1 | 3.5 |
| 32A(1 1/4) | 180 | 224 | 4.0 | 6 |
| 40A(1 1/2) | 180 | 224 | 4.4 | 7 |
| 50A(2) | 200 | 239.5 | 6.5 | 11 |
About flow rate
Selection data：
Nominal Size Selection Chart
Dimensional drawing
