Pressure Reducing Valve/Drain Separator

GD-29S-NE

*Maximum Inlet pressure 2.0MPa, applicable to high pressure equipment of high-rise building, factory, plant.
*Wetted parts are made of corrosion-resistant material (diaphragm/O ring is made of chlorinated EPDM), has excellent resistance to chlorine of tap water.
*Can be installed in any piping direction, such as horizontal or vertical.
*Closed construction could keep no external leakage even if diaphragm damaged.*Water supply law standards conformity product(E-606).





GD-29S-NE

Specifications

Features For water, stainless steel, Max. 2.0MPa, JWWA approved, flanged
Type Direct-acting type
Specifications Product type Direct-acting type
Nominal size 20A (3/4") - 100A (4")
Application Water
End connection JIS 20KRF flanged
Inlet pressure Max. 2 MPa
Reduced pressure 0.2 - 0.7 MPa (*)
Min. differential pressure 0.05 MPa
Max. pressure reduction ratio 7 : 1
Working temperature 5 - 90 degree(C)
Material Body Stainless steel
Valve FKM
Valve Seat Stainless steel
Diaphragm Chlorine resistant EPDM

Remarks

*Reduced pressure range
A:0.2-0.35MPa
B:0.3-0.7MPa
*Pressure gauge connection diameter is Rc1/4.
*20A-50A have built-in strainer(40mesh). 65-100A do not have strainer.
*Max. pressure reduction ratio depends on the set pressure.

Dimensions and Weights
Size L(mm) H(mm) Weight(kg)
20A(3/4) 164 170 4.4
25A(1) 164 170 5.4
32A(1 1/4) 204 224 8.7
40A(1 1/2) 204 224 9.0
50A(2) 225 239.5 11.8
65A(2 1/2) 225 329 21
80A(3) 237 345 25.5
100A(4) 290 412 40.5

About flow rate

Dimensional drawing

Dimensional drawing